We are pleased to offer you the following system for your review. Approx 1997’ Decker DH40-1 machine build #930. The machine is loaded with the program originally provided.
A frame off restoration and rebuild was just recently completed. The machine is currently under power at our facility and buyer is welcome to come and inspect under power.
The unit is located in Toledo, OH.
Some of the machines features include, but buyer should confirm:
Allen Bradley SLC 500 CPU
Allen Bradley DTAM-E - Operator Controller HMI
Red Lion Digital Pressure displays.
Watlow digital temp controls
Hydraulic return filters.
Hydraulic Tank 30 gallon reservoir.
Hydraulic pump 6 gpm @ 2000 psi
Hydraulic oil cooler.
On board air condensed cooling unit.
Poly and ISO Plate and frame Heat exchangers.
Independent mix head Pendant with 6 program selection.
Decker Pocket head 5/8” nozzle “L” type Mix Head.
Head provided with 1.5mm and 2.0mm injector cartridges.
10’ Hose to mix head.
Aprox 8’ boom – pneumatically operated.
Stainless Steel day tanks.
Day tank auto fill solenoids for ISO and Poly.
Babbit Tank level indicators.
Tank level sight indicators.
Coalescing filter regulator for air supply.
Blanket pressure control.
Agitation on Poly tank by Pneumatic motor.
In-line Poly nucleation via sparger.
Kidney loop recirculation of chemical for temp control.
Lube Devices seal lube for ISO pump.
Rotary Power pumps Model C07’s on Iso & Poly
pumps
Dual 5 HP Motors (1160 RPM) running each Iso / Poly pump.
Poly and Iso side magnetic couplings.
Calibration Station.
Low pressure feed pumps.
Poly and Iso supply and return line basket filters.
Co-ax low pressure by pass valves.
460V, 3 PH, 60hz, 45 amp
Copy of program provided on disc.
